| Model |
PMX2-DL |
PMX3-DL |
| Display Mode |
| Material thickness digits display |
|
|
| B-Scan cross sectional display |
|
|
| Combined B-Scan and digits display |
|
|
| Scan bar display |
|
|
| A-Scan display |
+ Rectified, - Rectified, Full Waveform (RF) |
+ Rectified, - Rectified, Full Waveform (RF), Landscape View |
| Measurement Range |
PE contact on steel - 1.00 - 9144mm (0.040 - 360”)
IE on steel - 1.27 - 25.4mm (0.050 - 1”)
IE on plastic - from 0.127mm (0.005”)
EE contact on steel - 2.54 - 914.4mm (0.100 - 36”)
IEE on steel - 0.152 - 12.7mm (0.006 - 0.5”)
EEV contact on steel - 2.54 - 152.4mm (0.100 - 6”) |
PE contact on steel - 1.00 - 9144mm (0.040 - 360”)
IE on steel - 1.27 - 25.4mm (0.050 - 1”)
IE on plastic - from 0.127mm (0.005”)
EE contact on steel - 2.54 - 914.4mm (0.100 - 36”)
IEE on steel - 0.152 - 12.7mm (0.006 - 0.5”)
EEV contact on steel - 2.54 - 152.4mm (0.100 - 6”) |
| Resolution |
0.01mm (0.001”), 0.001mm (0.0001”) selectable |
0.01mm (0.001”), 0.001mm (0.0001”) selectable |
| Measurement Rate |
|
|
| Manual |
8 readings per second |
8 readings per second |
| Scan Mode |
250 readings per second |
250 readings per second |
| Scan bar display |
10 to 33 readings per second |
10 to 33 readings per second |
| Additional Features |
| High Speed Scan Mode |
|
|
| Limit alarm mode |
|
|
| Selectable resolution |
|
|
| B-Scan display speed |
10 to 200 readings per second |
10 to 200 readings per second |
| Calibration setups |
64 custom user-definable setups, transferable to and from a PC archive |
64 custom user-definable setups, transferable to and from a PC archive |
| Gates |
3 adjustable gates, depending on measure mode selected |
3 adjustable gates, depending on measure mode selected |
| Pulser Type |
Square wave pulser with adjustable pulse width (spike, thin, wide) |
Square wave pulser with adjustable pulse width (spike, thin, wide) |
| Gain |
Manual or Automatic Gain Control (AGC) with 110dB range, varies with mode selected
Adjustable damping (35, 50, 75, 300, 600 & 1500ohms) |
Manual or Automatic Gain Control (AGC) with 110dB range, varies with mode selected
Adjustable damping (35, 50, 75, 300, 600 & 1500ohms) |
| Timing |
Precision TCXO timing with single shot 100 MHz 8 bit ultra-low power digitizer |
Precision TCXO timing with single shot 100 MHz 8 bit ultra-low power digitizer |
| Memory and Data Logging |
4GB internal memory
Sequential and grid logging
Alpha numeric batch identification
OBSTRUCT indicates inaccessible locations
Bitmap graphic capture and capture viewer |
4GB internal memory
Sequential and grid logging
Alpha numeric batch identification
OBSTRUCT indicates inaccessible locations
Bitmap graphic capture and capture viewer |
| Calibration Options |
Single, two point, velocity and material type |
Single, two point, velocity and material type |
| Transducer Probe Type |
Single element with delay tip, pencil with delay tip and contact probes |
Single element with delay tip, pencil with delay tip and contact probes |
| Transducer Frequency Range |
1 - 25MHz |
1 - 25MHz |
| Transducer Recognition |
manual - selectable from a list |
manual - selectable from a list |
| Display |
1/8” VGA (greyscale), 62 x 45.7mm (2.4 x 1.8”) viewable area |
1/4 VGA AMOLED colour display 57.6 x 43.2mm (2.27 x 1.78”) viewable area |
| Display Refresh Rate |
25Hz |
25Hz |
| Units (selectable) |
mm or inches |
mm or inches |
| LED Backlight |
on / off / auto |
on / off / auto |
| Repeatability / Stability Indicator |
|
|